posted on 2023-01-10, 02:53authored byZ. Shi, K. Jefimovs, M. Stampanoni, L. Romano
Structuring Si in arrays of vertical high aspect ratio pillars, ranging from nanoscale to macroscale feature dimensions, is essential for producing functional interfaces for many applications. Arrays of silicon 3D nanostructures are needed to realize photonic and phononic crystals, waveguides, metalenses, X-ray wavefront sensors, detectors, microstructures and arrays of Si pillars are used as bio-interfaces in neural activity recording, cell culture, microfluidics, sensing and on-chip manipulation. Here, we present a new strategy for realizing arrays of protruding sharp Si nanopillars using displacement Talbot lithography combined with metal-assisted chemical etching (MacEtch) in gas phase. With the double exposure of a linear grating mask in orthogonal orientations and the lift-off technique, we realized a catalyst pattern of holes in a Pt thin film with a period of 1 {\mu}m and hole diameter in the range of 100-250 nm. MacEtch in gas phase by using vapor HF and oxygen from air allows to etch arrays of protruding Si nanopillars 200 nm-thick and aspect ratio in the range of 200 (pillar height/width) with an etching rate up to 1 {\mu}m/min. With the advantage of no stiction, no ion beam damage of the Si substrate, nanometric resolution and high fidelity of pattern transfer the method is an easy-to-scale-up processing that can support the fabrication of Si pillars arrays for many valuable applications both at micro and nano-scale.
History
Disclaimer
This arXiv metadata record was not reviewed or approved by, nor does it necessarily express or reflect the policies or opinions of, arXiv.